Does a 24 oz Owala FreeSip Fit in a Car Cup Holder?

The short answer

It depends. The 24 oz Owala FreeSip is 3.12 in (7.9 cm) across at the base; car cup holders are typically 3–4 in (7.6–10.2 cm) across. That's toward the narrow end of the range, so it fits most holders that are at least 3.12 in across; only the narrowest or most tapered holders are too tight.

Dimensions compared

Measurement24 oz Owala FreeSipcar cup holderDifference
Height / depth10.68 in (27 cm)——
Diameter3.12 in (8 cm)3–4 in (8–10 cm)—

Typical inside diameter; there is no industry standard, and many holders taper toward the bottom.

24 oz Owala FreeSipcar cup holder (typical range)Drawn to scale, top view

What happens if you try, and what to do instead

Check the narrowest point
Measure your holder below any rubber fins; if it's at least 3.12 in, the bottle will sit down fully.
Use a cup holder expander
If your holder is too narrow, an expander gives a wider cradle on top.
Skip the boot in the car
A silicone boot adds thickness at the base and can stop a snug fit.

What to shop for

These are search links to a retailer. If you buy through them we may earn a commission, at no cost to you. How we make money.

Questions people ask

Does the 24 oz Owala fit in a cup holder?

Usually. Its base is 3.12 in across and car cup holders typically measure 3–4 in, so it fits all but the narrowest.

Is the 24 oz Owala narrower than the 32 oz?

Yes. Its base is narrower, which is why it fits more cup holders.

Does the 24 oz Owala fit with the boot on?

A boot adds thickness around the base, so in a snug holder it may not; take it off for the car.

How tall is the 24 oz Owala?

It stands 10.68 in tall, so check that it clears any armrest or controls next to the holder.

Where the numbers come from

All size compatibility questions or check any combination with the mattress, sheet and frame checker.